Automotive GPS tracker iTrack RV101

Description

Free one year web service at our tracking site!
Only a SIM card with active GPRS service and SMS is needed to be installed.
GPS tracking device for vehicles monitoring
GPS / GLONASS / BeiDou RV101 tracking device determines the coordinates using global positioning systems and transmits them with other parameters to the server using GPRS connection. This device is perfect for applications where it is necessary to determine the coordinates of the remote object, its speed, and a few extra options. Thus it is possible to determine the location, path and state of your vehicles, buses, trucks, ships, etc.
Also, the device can be used to monitor the voltage at the site and has three universal inputs for connecting various devices (limit switches, temperature sensors, pressure, flow meters and other fuels.) Also one digital output is present for controlling relays or other devices.
Tracking device RV101 may also contain RS-485 or CAN bus interfaces. It can be connected to the car CAN bus, fuel level sensors, and other additional devices using these interfaces.
In the absence of power, the unit will operate on internal battery, fully preserving functionality In the absence of GSM connection, all data will be accumulated in the internal memory of the device and when it enters the reception area will be transferred to the server.
Brief specification:
Supply voltage:
8 – 44 V DC
Current consumption:
5 – 250 mA
Temperature range:
-40 – +80 оС
GPNS receiver:
72 channels/-167 dBm GPS, GLONASS, BeiDou
GSM modem:
850/900/1800/1900 MHz
Accelerometer:
3 sensing axes
Buit-in memory:
2 MB (30 000 points)
Battery:
950/1500 mAh
Enclosure protection:
IP54
Enclosure dimensions:
106x70x20 mm
Specification
Power supply: The tracking device is powered by a DC voltage source. The nominal range is from 8 V to 44 V. The device is equipped with built-in circuit for overvoltage protection.
GPNS receiver: The device contains a highly sensitive GPS / GLONASS / BeiDou receiver with a gain of -167 dBm and 72 receive channels. Signals from GPS / GLONASS / BeiDou satellites are received on the built-in ceramic antenna.
GSM modem: The full-featured GSM / GPRS module is used that supports 4 GSM networks bands (850/900/1800/1900 MHz). Supported GPRS class for data: multi-slot class 12. It has power class of 4 (2 W in the ranges 850/900 MHz) and of 1 (1W ranges 1800/1900 MHz). The GSM antenna is built-in.
Built-in battery: The basic version is equipped with a LiPo battery with capacity of 950 mAh. Battery powered life is 4 to 48 hours depending on the selected operating parameters. Tracking device can be ordered with a 1500 mAh battery by request.
Built-in Memory: The memory capacity of 2 MB is enough to store up to 30 000 points of the route with all the additional parameters. The data is stored in memory in the absence of GSM connection and data will be transmitted to the server after the connection is restored.
Input channels: The device has a 3 universal inputs. They can be set to the following modes: digital inputs with adjustable threshold voltage, input pulse counters with adjustable threshold voltage and additional filtering options, analog inputs with adjustable filtering parameters. Inputs are configured independently for each input. Input voltage range is from 0 V to 40 V.
Output Channel: It is implemented as an open-collector to the negative power rail of the device. The output is protected against output overload and short circuit. Maximum allowable current is 600 mA.
Accelerometer: Can be used to determine the movement/parking, and also act as the shock sensor. Also, it is used to determine the incorrect installation position of the device and the alert is transmitted to the server. Number of axes in accelerometer: 3.
Additional interfaces: The device can be equipped with RS-485 interfaces or CAN bus. Installing of the interface is carried out on request. RS-485 interface has a built-in ability to work with the fuel level sensors. For the CAN bus the user can set the packages that are needed to be processed.
GPS and GSM antennas: In the basic configuration tracker includes a built-in GSM antenna and a built-in ceramic GPNS antenna. Optionally remote antennas with cable length 3 m can be installed.