Bison Kit/Kontakt Kit GRIFFON 5Lieter

Description

Bison Kit/Kontakt Kit GRIFFON 5Lieter
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
SUITABLE FOR:
For surface bonding or lamination of many materials that have to be bonded, subjected to a load and / or treated immediately. Ideal for materials under pressure or curved work where it is impossible to pinch or squeeze. Surfaces to be glued must fit completely. Very suitable for gluing and laminating metal and hard plastic panels (HPL; Formica, Duropal, Formica), veneer, hardboard and plywood on, for example, wood, multiplex plywood, chipboard or MDF. Also for bonding flexible insulation and foam materials, cork, leather and rubber.
NOT SUITABLE FOR:
Not suitable for PE, PP, PTFE and polystyrene foam (isomo).
BEFORE USE:
working conditions
Use only at temperatures between + 15 ° C and + 25 ° C and with a maximum relative humidity of 65%. To prevent the formation of bubbles due to condensation, the temperature of the adhesive and the materials to be bonded should be the same as the ambient temperature and preferably between + 18 ° C and + 20 ° C. Never allow a depth on glued surfaces.
Surface requirements
The surfaces must be dry, clean, free of dust and grease and well suited.
Preliminary surface treatment
Clean and degrease the surfaces to be bonded with Griffon cleaner. Highly absorbent surfaces should first be primed with diluted Contact Kit (add 10-20% Griffon Cleaner)
Tools
Fine-toothed (1 mm) glue dispenser, brush, rubber hammer, pressure roller or press.
Preparation of the product
Stir well before use. If necessary, dilute to the original viscous dilution.
cover
2-2.5 m2 / liter, applied on both sides, depending on the type of materials to be bonded.
DURING APPLICATION:
Instructions for use
Apply the adhesive thinly and evenly to both surfaces with the fine-toothed adhesive spreader (1 mm) or brush. Let both parts dry for 10 to 40 minutes. Once the glue stops stringing, join pieces together. Adjustment is then no longer possible. Avoid trapping air bubbles. Close tightly, tap thread or press materials.
Points of attention
If the adhesive joint on porous materials comes into continuous contact with water, the adhesive can become detached from the surface.
AFTER USAGE:
Stains / residue
Wet glue residue can be removed with Griffon Cleaner. Dried adhesive residues can be removed mechanically or with a paint squeegee.
Storage conditions
Close container properly and store in a dry, cool and frost-free place.
For surface bonding or lamination of many materials that have to be bonded, subjected to a load and / or treated immediately. Ideal for materials under pressure or curved work where it is impossible to pinch or squeeze. Surfaces to be glued must fit completely. Very suitable for gluing and laminating metal and hard plastic panels (HPL; Formica, Duropal, Formica), veneer, hardboard and plywood on, for example, wood, multiplex plywood, chipboard or MDF. Also for bonding flexible insulation and foam materials, cork, leather and rubber. Use only at temperatures between + 15 ° C and + 25 ° C and with a maximum relative humidity of 65%. To prevent the formation of bubbles due to condensation, the temperature of the adhesive and the materials to be bonded should be the same as the ambient tempera
Marke
GRIFFON
EAN
Nicht zutreffend
Farbe
Transparent
Volumen
5Liter
Gewicht
5kg
Geeignet für
Universal
Angebotspaket
Nein
Produktart
Montagekleber