CC2531 Zigbee Emulator CC-Debugger USB Programmer CC2531 Sniffer with Antenna

Description

CC2531 Zigbee Emulator CC-Debugger USB Programmer CC2531 Sniffer with Antenna
Output of 8 IO ports
Debug Pin
Combined firmware to achieve analyzer function
The DC debugger is a small programmer and debugger for the low power RF system in Chips
It can be used together with the integrated IAR workbench for 8051(version 7.51A or later)to debug
And SmartRF Flash programmer for flash programming
The DC debugger can also be used to control selected SmartRF Studio devices
Table content:
DC debugger
Mini USB cable
10-pin flat cable with 2.54mm connector
The DC debugger can be used to program and debug the following system-based chips in 8051 of Texas instruments:
CC1110...CC1111
CC2430...CC2431
CC2510...CC2511
CC2530...CC2531...CC2533
CC2543...CC2544...CC2545
It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following SmartRF Studio transceivers:
CC1120...CC1121...CC1125...CC1175
CC1100...CC1101...CC110L...CC113L...CC115L
CC2500...CC2520
It can also be used to program PurePath wireless devices:
CC8520...CC8521
CC8530...CC8531
The DC debugger works with IAR EW8051 version 7.51A or later
Product Introduction:
Operating frequency:2.405-2.485 GHz
Wireless transmission speed:250 Kbaud
Power consumption:Less than 20 mA (reception); Less than 25 mA (transmission)
Colour:Black
Material:plastic
Package Contents:
1 x CC2531 Sniffer Board with antenna
1 x Programmer Downloader Cable
1 X CC Debugger