Howie Glatter Holographic Attachment - Cross Hair Pattern

Description

Useful for aligning the returning beam on collimator face.
Removable diffractive optical element for use in Glatter Holographic Collimators.
This attachment will not fit older collimators produced prior to 2020. Collimators with the
new
thread standard will have "NV" added to the end of the product code
found
on the label attached to the storage box.
Howie Glatter Holographic Attachment
When it comes to lasers and collimation, one of the most trusted names in the business is guru Howie Glatter. His uncompromising quality and dedication to above average products, not only put his name above the rest - but in demand as the finest available on today's market. Usually a manufacturer doesn't take the time to explain to a customer exactly why their product excels over others - or why it performs better - but not Howie. Here's what he has to say about his new Howie Glatter Holographic Laser Collimator Attachment:
The holographic collimator has a removable diffractive optical element ("hologram") placed in the beam, just ahead of the laser. It diffracts light from the laser to project a diverging, symmetrical pattern around the central beam which is quite useful for centering optical elements. My standard pattern is an illuminated ten line by ten line grid, forming a large square box enclosing eighty-one smaller squares. It covers a wider angle (21 degrees) than any other holographic collimator, which allows direct centering of f/ 2.7 to f/ 35 optics. It may seem counter-intuitive, but the square grid pattern gives greater sensitivity for centering circular optics of arbitrary size. If a mirror or lens is decentered by only a small amount against the grid pattern, it produces a proportionately larger asymmetry in the intersection points of the grid lines with the perimeter of the optic. Cross-hair patterns do not have this property.
Because there are some collimating situations in which the diffracted pattern is unnecessary or unwanted, or maximum power in the central beam may be desired, the diffractor unscrews from the laser aperture, converting the holographic collimator to single beam mode. When it is screwed back it retains its alignment accuracy."
Accurate and Precise. What more could you ask?