Kable Kontrol Black Dual Wall Adhesive Lined Heat Shrink Tubing (3:1 Ratio)

Description

3:1 Dual Wall Heat Shrink Tubing Features
Adhesive Will Form Water Tight Seal When Cooled
3:1 shrink ratio (shrinks to 1/3 its original diameter)
Lengthwise shrinkage Approximately 8% During Shrink Process
Shrink Temperature Starts At 158°F (70°C), Totally Shrunk At 248°F (120°C)
Inner Adhesive Melt Temperature Starts at 158°F - 176°F (70°C - 80°C)
-67°F to 275°F (-55°C to 135°C) Operating Temperature Range
Meets UL, CSA & MIL Requirements
Flame Retardant Jacket
High Resistance to Chemicals & Oils
PRODUCT DETAILS
Dual wall (adhesive lined) 3:1 heat shrink tubing is made from a specially formulated, cross-linked polyolefin that is co-extruded with a meltable adhesive sealant. It offers excellent electrical, chemical and physical properties. This tough, flexible, flame retardant tubing can be used for electrical insulation, wire bundling, lightweight harnessing, and wire strain relief in a variety of home, commercial, industrial and military applications.
When heated and the tubing begins to shrink, the inner adhesive layer begins to melt and flow (similar to hot melt glue). When the tubing has shrank and cooled, the inner layer forms an adhesion layer between the tubing and the wire or component, providing a protective water-tight seal.
It is an excellent way to terminate the ends of your Braided Sleeving, creating a tight, professional finish.
The flame retardant jacket of 3:1 heat shrink tubing is tested and approved for use under UL VW-1 and CSA OFT material standards. Additionally, it is in compliance with RoHS, the European directive on the Restriction of Hazardous Substances.