M5StickC PLUS ESP32 PICO Mini IoT Develop Kit Finger Computer Color LCD M5STACK

Description

Description
M5StickC PLUS
is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen. It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototyping. Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stacks product series. The compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU, etc. Improvements from the regular StickC are a buzzer, bigger screen (1.14-inch, 135 * 240 resolution LCD Screen) and more stable hardware design. This revision increases the display area by 18.7%, and the battery capacity from 95mAh to 120mAh. It also supports the HAT and Unit family of products.
Power switch operation
：
·
Power on
：
Press power button for 2 seconds.
·
Power off
：
Press power button for 6 seconds.
Notice:
·
Baud rate supported by M5StickC Plus: 1200 ~115200, 250K, 500K, 750K, 1500K
·
G36/G25 share the same port, when one of the pins is used, the other pin should be set as a floating input.
·
For example, to use the G36 pin as the ADC input, Configuration the G25 pin as FLOATING
setup()
{
M5.begin();
pinMode(36, INPUT);
gpio_pulldown_dis(GPIO_NUM_25);
gpio_pullup_dis(GPIO_NUM_25);
}
Copy to clipboardErrorCopied
Product Features
·
ESP32-based support BLE 4.2 and WiFi
·
Built-in 6-Axis IMU
·
Red LED
·
IR transmitter
·
Microphone
·
RTC
·
Buttons, LCD (1.14 inch)
·
Built-in Lipo Battery
·
Extendable Socket
·
Built-in Passive Buzzer
·
Wearable & Wall mounted
·
Development Platform UIFlow, MicroPython, Arduino
Include
·
1x M5StickC Plus
Applications
·
Internet of things terminal controller
·
Wearable devices
·
Stem education product
·
DIY creation
Specification:
Resources
Parameter
ESP32
240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash Memory
4MB
Power Input
5V @ 500mA
Port
TypeC x 1, GROVE(I2C+I/0+UART) x 1
LCD screen
1.14 inch, 135*240 Colorful TFT LCD, ST7789v2
Button
Custom button x 2
LED
RED LED
MEMS
MPU6886
Buzzer
built-in buzzer
IR
Infrared transmission
MIC
SPM1423
RTC
BM8563
PMU
AXP192
Battery
120 mAh @ 3.7V
Antenna
2.4G 3D Antenna
PIN port
G0, G25/G36, G26, G32, G33
Operating Temperature
32°F to 104°F ( 0°C to 40°C )
Net weight
15g
Gross weight
21g
Product Size
48.2*25.5*13.7mm
Package Size
65*25*15mm
Case Material
Plastic ( PC )