-40%
RF Active Probe 0.1-1500 MHz-1.5 GHz analyzer oscilloscope, RF cable included
$ 6.33
- Description
- Size Guide
Description
DESCRIPTIONWhen it is required to make a measurement at a node of an RF circuit, connecting to the circuit using a normal oscilloscope probe, even on the x10 setting can change the behaviour of the circuit.
For those difficult cases, you
need a special, high impedance and low capacitance, probe like Im selling here. Also you can notice two , soldered in series, capacitors on the input of probe. It is Hi Q, Low ESR, Hi V (100v according specification). That capacitors help windstand high DC voltage on the input.
This lot includes assembled and well tested RF probe PCB with 30cm SMA-SMA cable. It suppose to be placed in some tube or enclosure. Even old marker pen will be ok.
For work with my probe you need just connect external power supply and INCLUDED 30cm coaxial cable between probe and analyzer or oscilloscope.
To get accurate results it is important that the ground probe contacts an RF ground close to the point on the circuit.
So to solder the wire somewhere on the RF probe ground surface and then connect it to the ground of tested device.
SHIPPING
We ship worldwide from Ukraine by Registered Airmail with tracking number.
After package left Ukraine you can track it on Local Post web site. We ship next business day once payment received.
Delivery time depends on destination and Customs, usually it takes about 20-25 business days.