-40%
RF Active Probe 0.1 - 500 MHz with AD8307 detector
RF Active Probe 0.1 - 500 MHz with AD8307 detector
RF Active Probe 0.1 - 500 MHz with AD8307 detector

RF Active Probe 0.1 - 500 MHz with AD8307 detector

$ 7.91

Availability: 271 in stock
  • Return shipping will be paid by: Buyer
  • Brand: 60dbm.com
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • Condition: New
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Restocking Fee: No
  • Country/Region of Manufacture: Ukraine

    Description

    DESCRIPTION
    This is high input impedance probe intended to measure RF voltage
    and conversion it to DC voltage. You need just this probe and DMM (Digital Multi Meter) and you can measure small RF voltage. Also you can use probe as RF sniffer, just replace input pin with  something like antenna for frequency you want to check. Also you can use this probe with NWT boxes and for many other useful things
    This lot includes assembled and well tested RF probe with AD8307 detector PCB.  It suppose to be placed in some tube or enclosure. Even old marker pen will be ok.
    Also you need solder DC supply and output wires to DMM (for example).
    To get accurate results it is important that the ground probe contacts an RF ground close to the point on the circuit.
    So to solder the wire somewhere on the RF probe ground surface and then connect it to the ground of tested device.
    If you looking 50 Ohm AF8307 based probe please see this https://www.ebay.com/itm/333599037092
    TECHNICAL SPECIFICATION
    Input impedance:  10 MOhm
    Input capacitance:  0.5pf
    Maximum RF input:  3v
    Working
    frequency: 0.1-500 MHz
    Output: DC voltage
    DC supply: +9-24v
    PCB sizes:  55mm X 8.5mm
    SHIPPING
    We ship worldwide from Ukraine by Registered Airmail with tracking number. We ship next business day once payment received. Delivery time depends on destination and Customs, usually it takes about 15-25 business days