Soudal Grip ALL Grab Adhesive Sealant Beige High Strength 290ml 3x 6x 12x PACK

Description

Soudal Grip ALL Grab Adhesive Sealant Beige High Strength 290ml 3x 6x 12x PACK
Solvent-based is a fibre reinforced high strength construction adhesive with high initial grab (over 125kg/m²) and high bond strength. Compatible with most building materials (porous and non-porous).
Characteristics
Fibre-reinforced.
Excellent initial grab (at least 125kg/m², full surface bonding) for fast and direct bonding.
Very fast powerful bonding.
Direct application onto one substrate.
Replaces nails and screws.
Suitable for bonding on uneven surfaces.
Excellent adhesion on a wide range of construction materials both in interior and exterior applications.
Areas of Use
Suitable for the bonding of decorative materials, skirting boards, gypsum panels in vertical, horizontal and overhead applications.
Bonding of carpet grippers, edge strips and aluminium and uPVC stair nosing.
Bonding of wall and floorboards, window frames and partitions.
Suitable for direct bonding of many materials such as wood, many plastics, bricks, stone, tiles, metal to porous surfaces such as concrete, plaster, MDF, OSB, timber panels, chipboard etc.
Directions for use
Method
: Apply the adhesive by means of a caulking gun onto one surface in strips or dabs. Always apply adhesive to the edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required on a vertical fixing or for heavy components.
For the bonding of impervious or heavy materials use the transfer method: press components together and release for max. 5 min.
Return parts together and batten down with a rubber hammer. If necessary support until adhesive is completely cured (approx. 24-48 hours).The bond can be loaded after 24-48 hours.
Application temperature
: +5°C to +35°C.
Clean
: Soudal Adhesive Cleaner 90A, mechanically if cured.
Repair
: With the same material.
Solvent-based is a fibre reinforced high strength construction adhesive with high initial grab (over 125kg/m²) and high bond strength. Compatible with most building materials (porous and non-porous). Suitable for direct bonding of many materials such as wood, many plastics, bricks, stone, tiles, metal to porous surfaces such as concrete, plaster, MDF, OSB, timber panels, chipboard etc. Method: Apply the adhesive by means of a caulking gun onto one surface in strips or dabs. Always apply adhesive to the edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required on a vertical fixing or for heavy components. Return parts together and batten down with a rubber hammer. If necessary support until adhesive is completely cured (